Archive for August, 2014
Here is a quick tip to help you stay in that command while being able to switch targets. See below the break for more specifics on what this tip covers.
While in a multi-part command like Join with the Multiple Join option checked, you can switch targets of the join by dragging a selection area (ie: using the fence option new in 2015). If you drag an area without selecting anything you can clear the join target and move on using the same command without leaving the command.
PREAMBLE: it was quickly brought to my attention that while the NCARB site indicates that their practice exam programs are not compatible with 64-bit operating systems, the software will indeed run in a 64-bit environment. The error will occur when you launch the practice vignettes for each practice exam. While your mileage may vary on the success of running these program in a 64-bit environment, I would venture to say it’s safe to bet that the exam itself will happen on a 32-bit system and while there MAY NOT BE ANY DIFFERENCE it is advertised as being 32-bit program. Just keep that in mind as you proceed doing the vignettes in a 64-bit environment. I’d love to hear feedback from Prometric or NCARB on this issue.
NCARB by the Numbers does a great job of tracking the status of Architectural Registration as an indication of the health of our profession. Their numbers for 2014 indicate a very healthy number of registrations happening especially at a younger age as students are exiting school. I feel that they have done a great job of preparing us for the atrocity that is known as the Prometric testing interface. Unfortunately the practice software only runs in Windows XP. I mean, it’s great that the software is available for us to practice with but even the developer of Windows XP admits that the software is outdated and no longer supports it! NCARB gives us a fee based option for an extremely tiny $10 annual subscription. However, if you’re like me and realize that that very same $10 is like 2 lunches you’re quickly looking at the FREE alternative that they offer. While NCARB does point you towards the download center on Microsoft’s site, there aren’t many instruction past the point of “click here to read more instructions”.
So here I am hoping to give knowledge to those of you looking for how to install the free alternative practice exams. Best of luck in your AREs. Happy designing!
- Download and install XP Mode
- Download and install Virtual PC. Be sure you choose the file with “x86” in it for 32 bit systems and “x64” in it for 64 bit systems. If you aren’t sure which you need to get, ask your computer nerd friend you have around for questions like this.
- Download the Practice Exam Programs
- Restart your machine
- Get some coffee
- Go to Start button > Windows Virtual PC > Windows XP Mode
- Follow the instructions in the dialog boxes
- Start Setup! (this will take a while)
Up to this point everything is pretty much covered under Microsoft’s directions on the Virtual PC and Windows XP mode tool. The rest will cover how to install and use the practice guides within Windows XP Mode. Once the setup is complete it will automagically fire up the Virtual PC with Windows XP running. Hopefully you remember your password or had “Remember my Credentials” checked. XP will finish booting up inside of a Windows 7 Window (WINDOWCEPTION!)
- Right click on the Winows XP Start Button > Explore
- Browse to where you saved the practice exams on your Windows 7 disk. This will appear as a network drive in the explorer places bar on the left. In my case I downloaded all files directly to my host machine’s “C:” drive
- Double click the practice exam you wish to install and click “Run” at the security dialog
- Get some more coffee… maybe even some lunch cause this will take almost as long as the initial setup.
- Click Finish
- Repeat above if you want to install multiple exams
The really cool thing about Virtaul PC and Windows XP mode is that once you have the application installed inside the Virtual PC environment you can run the applications one of two ways.
- Run it inside of the Virtual PC window containing Windows XP
- Run it as a virtual application straight from your Windows 7 start menu
NOTE: when logging off of the virtual pc or closing the virtual application I almost always receive a crash report from the Virtual PC application. This shouldn’t affect your machine and you should still be able to continue using the software and your computer if you receive these crash reports.
So there you have it. A way to save $10 a year and practice for your AREs at the same time! Hope this has been helpful, thanks for stopping by and hope to see you around again soon!
Autodesk places a lot of emphasis on using Certified Hardware with Certified Drivers to aid in their quality assurance efforts. I’ve found however that I tend to lose more work when working with Certified Hardware run by Certified Drivers than on non-certified hardware with non-certified drivers. I made a graph to illustrate my personal experience:
I typically have some choice words to say when the certified drivers cause the certified hardware to crash. I have recorded these words and created a word chart with my favorite words and phrases. Size emphasis on the ones I use the most: